CAUTION: Support the rocker arm near the pin to avoid breaking it.
Remove the four head bolts. I had to use penetrating oil and also tapped on the bolt heads with a small hammer to loosen them. Be careful. Broken bolts are no fun to deal with.
| First step for me was to remove the cylinder
head and mixer. I removed the nail from the rocker arm pin and drove
the pin out.
CAUTION: Support the rocker arm near the pin to avoid breaking it. Remove the four head bolts. I had to use penetrating oil and also tapped on the bolt heads with a small hammer to loosen them. Be careful. Broken bolts are no fun to deal with. |
|
 |
Cylinder head and mixer removed. |
| Remove the set screw and gently pry the mixer off the head.
|
 |